The Minnich M-BOX gives you complete control of your concrete by allowing you to control the speed/vibrations per minute (VPM) of up to two high cycle vibrators by choosing speeds of 6,000, 8,000, and 10,800 VPM’s. The M-BOX converts the 230 volt single phase outlet of a 5000 watt generator to a 230 volt 3-Phase output and allows two high cycle vibrators to be run simultaneously.

• Select Speed (6,000, 8,000, 10,800) VPM
• Durable Housing / Frame
• 508A UL Panel Certification
• Runs Competitor’s Vibrators

Available in four, six, and eight-bank configurations. Minnich hydraulic manifolds offer precise control of hydraulic vibrators.

With a head diameter of 1-3/4”, Minnich HV-3 Series hydraulic internal paving vibrators are well-suited for smaller slip-form applications. Minnich paving vibrators are designed to withstand the rigors of the industry. For mainline paving, a block isolator offers better shear spring rate, less area for concrete build-up and a greater rubber-to-steel bond area. This translates to less end-of-day clean-up time, reduced transfer of vibration to the paver and less wear on the isolators. A two-isolator setup can fit into tighter areas for barrier wall molds. The hydraulic hose features an abrasion-resistant coating to help reduce vibrator failure. A specially designed Minnich three-gear motor provides hydrostatic balance for longer motor life and greater starting torque.

With a head diameter of 2-5/8”, Minnich HV-2 Series hydraulic internal paving vibrators are ideal for most slip-form applications. Minnich paving vibrators are designed to withstand the rigors of the industry. For mainline paving, a block isolator offers better shear spring rate, less area for concrete build-up and a greater rubber-to-steel bond area. This translates to less end-of-day clean-up time, reduced transfer of vibration to the paver and less wear on the isolators. A two-isolator setup can fit into tighter areas for barrier wall molds. The hydraulic hose features an abrasion-resistant coating to help reduce vibrator failure. A specially designed Minnich three-gear motor provides hydrostatic balance for longer motor life and greater starting torque.

• Round Vibrator Heads
• Block Isolator
• Armor Coated Hydraulic Hose
• Minnich Designed and Built Hydraulic Motor
• Three gear motor provides hydrostatic balance for longer motor life
• Designed to provide greater starting torque

Power your high-cycle concrete vibrators with the proven performance of the Minnich High Cycle Generator. Proven on thousands of jobs worldwide, the generator ensures the right VPM and provides high-amplitude/frequency vibration for minimal aggregate disturbance. The unit provides more force and greater placement power than other generators, with fewer parts for easier and less costly maintenance.

Get the proven power of a the Minnich hand held vibrator unit in the palm of your hand for full depth repair, bridge deck, or tilt up concrete pours. The 20 lb gas powered GX50 Mini-4 stroke Honda engine provides reliable power, convenience, and mobility on the jobsite. The 2 horse powered engine contains an all-position diaphragm carburetor for operation in any position without stalling. All Minnich flex shafts and vibrator heads are interchangeable. Straight and bent shafts are available.

• 4 Stroke – No Fuel/Oil Mixing
• Full 360 “Any-Side Up” Operation
• Easy Starting, Low Noise, Easy Maintenance, and Superb Acceleration
• Low Fuel and Oil Consumption

Minnich flex shaft vibrator heads are designed for durability and longevity. Manufactured at Minnich with high-quality steel, flex shaft vibrator heads feature heavy-duty bearings for longer life.

The Minnich hydraulic external paving vibrator is well suited for paving pans and bar inserters.

Minnich heavy-duty steel reinforced casing is available in 1 3/16” and 7/8” diameters. A reversible core adds life, while core strain relief provides extra protection. Coarse thread on the core/casing prevents cross threading.

The Control Speed Vibrator (CSV) electric flex shaft concrete vibrator enables contractors to choose between the set speeds of 6,000, 8,000, 10,500, and Open VPM via a blue tooth Minnich app on ISO or Android platforms. Once the speed is chosen the CSV will maintain that speed as concrete load changes. The CSV is a lightweight, durable, 15 amp (115-volt) universal motor that drives a full line of Minnich shafts and heads. The unit comes standard with a quick disconnect. Optional quick disconnects that adapt to the shafts and heads of other manufacturers are available. The Minnich CSV was designed to run at a lower amp range making the motor more efficient than other on the market. Minnich utilizes a durable frame to extend the vibrator’s life. The lightweight motor and frame-handle positions offer many ergonomic user features and comes with a shoulder harness.

PROTECTED BY U.S. PATENT NO. 11,025,125, D916018, & 12,068,657