Effectively managing your equipment fuel costs is essential in the construction, demolition, and road building industries, where they constitute a significant portion of your operational expenses. Avoiding excessive engine idling is key, because it can drive up those already expensive costs. For instance, according to one equipment manufacturer’s data, an average 36 ton excavator running 1,000 hours per year wastes approximately 400 gallons of fuel through idling alone. To combat this resource drain, we’ve compiled some essential tips for minimizing idle times, optimizing machine efficiency, and reducing unnecessary equipment wear.

---

THE COSTLY IMPACT OF ENGINE IDLING

Engine idling happens when equipment continues to run when not being actively used. This practice undermines profitability, reduces machine efficiency, and depletes valuable resources. Extended idle times can lead to:

• Fuel consumption without productive work
• Increased wear on engine components
• More frequent maintenance visits
• Accumulation of unproductive “ghost hours” that can decrease resale value
• The machine not reaching proper operating temperature, potentially causing emissions system problems that aren’t covered by manufacturer warranties

While the impact of “ghost hours” or excessive idle times may not be immediately visible, they steadily erode your asset value. Consider this example: two machines, A and B, both have 5,000 working hours, but machine A accumulated substantially more idle time. During resale, machine A displays 10,000 total hours compared to machine B’s 7,500 total hours. This 2,500 hour difference can reduce the sale price by up to $20,000, depending on equipment size and type – all because of too much idling.

Despite its substantial negative effect on business profitability, engine idling remains widespread at construction sites. However, several effective strategies can help minimize this practice.

---

EDUCATE YOUR OPERATORS

It’s essential that equipment operators fully understand how engine idling impacts your operation’s financial health and equipment longevity. Implement a straightforward policy: if the machine isn’t performing work for more than 10 seconds, it should be shut down. Some operations even implement an incentive or rewards program for operators who effectively and consistently reduce idle times, resulting in significant gains on their bottom line.

---

UTILIZE EQUIPMENT MONITORING SYSTEMS

You can’t improve what you don’t measure. Today’s machines typically include monitoring capabilities that track usage patterns and transform operational data into actionable insights. These systems enable you to track and analyze idle times. By identifying patterns of engine idling, you can take targeted steps to train operators or adjust site workflows, resulting in improved operational efficiency.

---

PLAN YOUR PROJECTS CAREFULLY

Effective project planning can dramatically reduce engine idling. Deploy the right number and types of machines to each location to eliminate bottleneck, redundancies, and job delays. Equipment matching is critical—for example, when loading articulated trucks, your excavator should complete the job in three to five bucket loads. If it takes more than five loads, you will likely have machines waiting around, idling, and wasting time and fuel.

---

SELECT MACHINES WITH AUTOMATIC START AND STOP TECHNOLOGY

Many modern pieces of equipment include idling reduction features that help increase machine efficiency. Whether labeled as auto idle, auto stop, auto start, or idle stop systems, these technologies can significantly reduce unnecessary engine idle times. When purchasing new equipment, prioritize models with these fuel saving features.

---

If you have any questions about minimizing engine idling or increasing machine efficiency in general, contact our team today!

BEST PRACTICES FOR HEAVY EQUIPMENT WASHING

Cleaning is a critical aspect of machine maintenance. It helps improve performance, reduce wear and tear, boost efficiency, extend service life, and safeguard your investment. However, heavy equipment cleaning isn’t as straightforward as washing your car. To help you complete it the right way, we’ve put together some important tips and best practices.

---

MAINTAIN A REGULAR SCHEDULE

The frequency of heavy equipment washing depends on your usage and specific jobsite conditions. For particularly muddy or dusty environments, you might need to clean it every few days or at least once a week. We suggest adhering to a cleaning schedule as part of your regular machine maintenance routine, because the longer you leave grease, mud, and other debris on your equipment, the more it interferes with operation and the tougher it is to get off.

---

USE A DEDICATED CLEANING AREA

When washing heavy equipment, it’s crucial to use specialized areas or bays designed to collect and process wastewater. Many local regulations prohibit the discharge of water containing grease, fuel residues, and other pollutants into open waters and groundwater sources. Dedicated wash bays allow you to clean your machinery while preventing contaminants from entering the surrounding environment.

There are two primary types of heavy equipment washing bays. The first is a permanent station built at your facility or equipment storage site. They second is a portable wash pad that can be brought with you from jobsite to jobsite. Whether permanent or portable, both types work by capturing the polluted water in a catch basin below the wash pad and then moving it through a water treatment recycling system that removes the harmful materials.

---

ALWAYS BRING A PRESSURE WASHER

A pressure washer is an essential tool for tackling the most challenging heavy equipment cleaning jobs. It can effectively remove persistent residue from hard to reach areas, including old grease, mud, rocks, sludge, vegetation, and more. For buildup that is especially difficult to clean off, we recommend using a hot water pressure washer. The hot water dissolves and breaks down the toughest grime more quickly and efficiently than cold water, helping you save both time and water.

---

PRIORITIZE APPROPRIATE PROTECTIVE GEAR

During heavy equipment cleaning, we strongly recommend wearing full length clothing or coveralls, slip resistant footwear, face and eye protection, and gloves. Proper attire and equipment will minimize the risk of employee injuries from hot water, chemicals, or contaminants that dislodge from the machinery.

---

SELECT THE RIGHT CLEANING AGENTS

When your equipment is covered in a combination of organic materials (like lubricating grease, fuel residue, or animal waste) and inorganic substances (such as sand, gravel, and dust), detergents will make the cleaning process easier and more effective.

Here are some effective chemicals for removing grease, dirt, and grime from your machines:

• Acidic pre-soaks and/or aluminum brighteners for oxidation and mineral residue
• High pH detergent to neutralize your low pH presoak & clean normal buildup
• Friction detergent for brush washing that will reduce drying & surface abrasions
• Degreaser for a heavy buildup of grease, fuel spills, and oils
• Concrete and cement cleaner for removing paving materials, lime, fly ash, rust, and water scale

---

REMOVE ATTACHMENTS BEFORE CLEANING

When completing heavy equipment washing, it’s essential to take off any attachments and clean them separately. This approach allows easier access to accumulated grime and makes the entire washing process easier and more effective.

---

For any inquiries about heavy equipment washing or general machine maintenance, please contact our team.

Ensuring robust and effective jobsite security is crucial for any project’s success. Your work area houses millions of dollars worth of equipment and materials, and the construction industry faces annual losses of up to $1 billion due to theft. Implementing construction security measures is key to reducing these losses and deterring potential thieves from accessing your work area.

---

CONDUCT A COMPREHENSIVE RISK ASSESSMENT

The first step in enhancing construction site security is performing a thorough evaluation to identify vulnerabilities. This assessment should examine potential risks, including the site’s location, local crime rates, and the value of on-site assets. Once weak points are identified, you can develop a targeted jobsite security strategy.

---

IMPLEMENT ADEQUATE LIGHTING

Well lit work areas serve as an excellent deterrent when unoccupied at night. Most criminals prefer to operate undetected, so illuminating the area increases the risk of discovery and discourages potential intruders.

---

INSTALL PHYSICAL BARRIERS

Erecting fences, walls, and gates significantly improves construction site security by restricting unauthorized entry. Secure fencing with controlled entry points limits access to authorized personnel, while concrete barriers can prevent vehicle intrusions.

---

DEPLOY SURVEILLANCE SYSTEMS

Video monitoring is a crucial component of effective jobsite security. These systems provide round-the-clock surveillance, alert personnel to suspicious activities, and offer evidence in case of theft or vandalism. Consider portable surveillance options that you can bring from job to job for a more cost effective, flexible construction security solution.

---

UTILIZE ALARM SYSTEMS

Alarms play a vital role in jobsite security by notifying security personnel of intrusions. Loud noises and flashing lights can deter trespassers and immediately inform on-site staff of security breaches. Similar to portable surveillance systems, portable alert systems offer versatility across multiple projects.

---

TRAIN YOUR WORKFORCE

Educate all team members on identifying potential risks, recognizing suspicious activity, and following proper security protocols. Regular training sessions will enhance your crew’s ability to prevent and report jobsite security issues effectively.

---

SECURE VALUABLE EQUIPMENT

When it comes to high value equipment, we recommend implementing additional protective measures. Use GPS tracking devices, secure storage containers, and always maintain detailed inventory records to enhance overall construction site security.

---

If you have any questions about construction site security or preventing equipment theft, contact our team today!

Whether you’re excavating, transporting materials, or simply navigating through a worksite, sandy soil can present unique challenges for traction, excavation safety, and various aspects of construction and earthmoving operations. To help you overcome these challenges and minimize costly delays, we’ve put together some important tips for effectively digging in sand and maneuvering on sandy soil.

---

SELECT THE RIGHT CTL OR EXCAVATOR TRACKS

When digging in sand or traversing sandy soil, maintaining adequate traction can be difficult, particularly on slopes. We recommend opting for wide, high flotation CTL or excavator tracks. These distribute weight more evenly, reducing the risk of sinking into soft, sandy terrain.

---

PICK SUITABLE SKID STEER TIRE

For non-tracked equipment like skid steers, both solid and pneumatic tires can provide sufficient traction in sandy environments. Look for skid steer tires with deep tread patterns, as these offer the necessary grip for effective maneuverability on loose surfaces such as sand and gravel.

---

EXERCISE CAUTION WHILE EXCAVATING

When digging in sand, it’s crucial for operators to prioritize precision and gentleness. Sandy soils are easily disturbed, increasing the risk of cave ins compared to denser soil types. By excavating slowly and removing material in smaller increments, you can enhance stability, reduce the likelihood of dangerous collapses, and improve overall project efficiency.

---

USE THE RIGHT EXCAVATOR BUCKET OR SKID STEER BUCKET

Selecting the appropriate bucket for your machine is key for successful digging or loading operations. In loose, sandy soils, a general purpose excavator bucket or skid steer bucket with wide teeth and curved edges is often the best choice. This design minimizes soil disturbance while still allowing for efficient material movement.

---

MAINTAIN CLEAN TRACK

Sandy soil can cause abrasion between components, leading to increased wear on excavator tracks. Throughout the workday, use a shovel to clear the undercarriage and a pressure washer to remove sand and dirt from hard to reach areas.

---

APPLY AMPLE LUBRICATION

Due to its abrasive nature, sand can be harsh on your undercarriage, bucket, and other moving parts. Ensure all these components are well greased, and reapply lubricant multiple times throughout the day or approximately every five hours. This practice helps keep sand away from sensitive parts and pushes out any accumulated sand when fresh grease is applied.

---

IMPLEMENT PROPER TRENCH PROTECTION

Installing trench protection is critical when working in sandy soil. Traditional sloping and benching methods are often less effective in sand due to its loose nature. Instead, consider using shoring and trench shields, which utilize metal supports to reinforce trench walls and prevent cave ins during excavation.

---

CONDUCT THOROUGH SOIL TESTING

Soil tests are crucial for jobsite and structural safety, especially when working with sandy soil. These assessments help on-site experts determine the appropriate benching, shoring, and sloping techniques to prevent cave ins during excavation. Understanding the soil’s physical and chemical properties allows you to calculate its weight bearing capacity and determine the necessary compaction levels.

---

For any questions about operating on sandy soil, selecting the right excavator bucket or skid steer bucket, or digging in sand, contact our team today!

Every piece of equipment will need new parts eventually. Whether a component breaks, wears out, or you’re just upgrading, replacements will be necessary from time to time. When deciding which construction equipment parts are best for your machine, you have a few different options available. To help you out, we’re reviewing what those options are and what the benefits or drawbacks are of each different type.

---

THE DIFFERENT CATEGORIES OF CONSTRUCTION EQUIPMENT PARTS

There are three primary types of construction equipment parts, OEM, aftermarket, and remanufactured.

OEM components – OEM means original equipment manufacturer. These parts are built by the same manufacturer who produced your machine. They are exactly the same as the components that were originally in the piece of equipment.

Aftermarket parts – Components or accessories that are produced by a different manufacturer than the one that built the machine are called aftermarket. They are engineered to closely resemble and replicate OEM parts, but they are not identical to them and are generally less expensive.

Remanufactured parts – Remanufacturing restores old or worn out complex parts to like new condition in terms of performance, quality, and reliability. The process works by completely taking it apart, cleaning it, checking it for quality, and then re-engineering and rebuilding it with new individual components. Reman parts are less expensive than OEM components, but they meet the same specifications. Typical examples of remanufactured parts include oil pumps, torque converters, power shuttles, A/C compressors, injection pumps, alternators, and others.

---

WHICH TYPE OF PART IS BEST FOR YOUR EQUIPMENT

OEM components are usually the right choice when it comes to purchasing construction equipment parts. The reasons why are quality, warranty, and reliable distribution.

• Quality – OEM parts are engineered and produced specifically for your machine from the same manufacturer. You can be confident of a precise fit and excellent performance. Plus, you’ll most likely have better support than you would with an aftermarket manufacturer if there is a problem with the part.
• Warranty – OEM components are generally covered by the manufacturer’s warranty, and using them will not affect your equipment warranty. Installation of aftermarket parts, on the other hand, may compromise or void your warranty.
• Reliable distribution – More often than not, manufacturers have a large dealer network and parts inventories, so you can locate and purchase what you need quickly to minimize equipment downtime.

With aftermarket parts, the main drawbacks are poor compatibility and quality. Due to their design, they may not work seamlessly with your machine without making some adjustments and modifications. These changes increase the cost of the part and may hinder its effectiveness.

Aftermarket parts are typically cheaper than OEM components because they are usually lower quality. They also generally aren’t put through as rigorous of testing to make sure they do their job properly. If you’re considering aftermarket parts, the question you need to ask yourself is, are you willing to risk costly downtime caused by an inferior component for a slight cost savings in the short term?

---

HOW ABOUT REMANUFACTURED PARTS?

Remanufactured parts are an excellent alternative to OEM components. They are much less expensive than purchasing new, but, unlike aftermarket options, they are engineered and produced to the same factory specifications and often covered by warranties that are the same as or better than new OEM parts.

---

When it comes to choosing construction equipment parts, we recommend you choose OEM components or remanufactured options. If you have any questions about which parts to choose, contact our team today!

Earthmoving and digging projects can very dangerous if the proper precautions and measures aren’t taken by your excavator operator and other people on the jobsite. To help you avoid potentially hazardous situations in your work area, we’re sharing some key tips and best practices to improve the safety and productivity of your operation.

---

INSPECT YOUR EQUIPMENT BEFORE BEGINNING WORK

Prior to starting their shift, your excavator operator needs to check the machine for any indications of damage or abnormal operation. They should be on the lookout for things like intermittent electrical failures, inappropriate noises, structural cracks or other signs of impending breakage, and any damage to the machine. Catching issues as early as possible will prevent bigger, more dangerous, and more expensive problems down the road, helping avoid downtime and improving excavator safety.

---

REMEMBER YOUR FUEL

It may sound simple, but one of the first things your excavator operator should do each day is make sure their machine has fuel in the tank. If you run out of gas while working, the machine may shut down unexpectedly, leading to unstable loads and dangerous conditions for everyone around the excavator. All it takes is a quick look at the fuel gauge to know whether or not you need to top off the tanks before beginning work for the day.

---

MAKE TRACK OF ADJUSTMENTS ON-SITE

Key to excavation safety is having properly tensioned tracks. If they are too loose, then they can detrack. If they are too tight, you can experience power loss, excessive wear, and even track breakage. Both situations lead to unstable and dangerous working conditions. It’s critical that your excavator operator makes tension adjustments in the field, rather than in the shop. The reason is that tension can increase if the sprocket and chain are packed with mud or other materials, so a track that was correctly tensioned in your shop may become too tight when packed with mud in actual job conditions.

---

CHECK THE GROUND PRIOR TO WORKING

Hidden or unexpected obstacles like rocks, stumps, and slopes can cause your excavator to slide, catch an edge, and even tip over. Before starting each shift, your excavator operator has to assess the terrain and search for any large debris, loose soil, holes, ditches, inclines, or other obstructions that may hinder excavation safety.

---

USE THE RIGHT ATTACHMENTS

A key way to improve excavator safety is to choose attachments that are approved by your machine’s manufacturer. Look at your owner’s manual to find out your equipment’s hydraulic flow, weight capacities, and any other limitations. It’s important to not push your excavator beyond the recommendations in the manual or use an attachment that it’s not compatible with.

---

NEVER UNDERCUT

An undercut is when you dig out the ground underneath the excavator itself. In order to maintain excavation safety and prevent any cave ins or other accidents, your operator has to always be aware of where the lip of the hole is and be very cautious to not to remove dirt from under the tracks.

---

DON'T OVERLOAD THE BUCKET

The fastest way to compromise excavation safety on your jobsite is to work beyond your machine’s maximum capacities. Overloading a bucket will lead to instability and can potentially cause a tip over, which may result in serious injury to the operator and surrounding crew. You should avoid overloading your bucket at all times.

---

MONITOR YOUR TRACK POSITION

Whenever operating on a hill or any incline or decline, make sure your machine’s tracks are pointing up and down the slope. You never want them to be parallel to the slope, as this distributes the weight of the excavator unevenly and can result in a roll over. Your excavator operator needs to maintain a stable center of gravity at all times.

---

POSITION YOUR TRUCK PROPERLY

Our last tip to increase excavator safety on the jobsite is to correctly load your trucks. We suggest positioning the truck on the left side of the excavator, so the truck and excavator are facing cab-to-cab. The truck has to be stopped with the truck bed headboard in line with the rear of the excavator cab. This position provides the excavator operator excellent visibility, since the boom is out of the way. It also gives about a 25° swing into the truck, which is the most effective position for loading.

---

If you have any questions about excavator safety, excavation safety, or any other tips for your operator, contact our team today!

TIPS FOR GETTING YOUR EQUIPMENT OUT OF THE MUD

When you’re operating your heavy equipment off road, there’s always a chance that you can become stuck in the mud. Even just slight rain or snow has the potential to transform a dusty work area into a wet, soggy, sticky mess. Although your tracked and wheeled machines are designed to handle difficult terrain, any piece of equipment is susceptible to being trapped in mud, including skid steers, CTLs, wheel loaders, and excavators. To avoid becoming stuck, follow our tips and best practices below.

---

IT'S BEST TO AVOID BECOMING STUCK IN THE FIRST PLACE

Removing your machines from the mud can be a difficult, time consuming task that will put you behind on a job. Follow these tips to keep that from happening:

• Prior to beginning work each day, thoroughly check the site to get an idea of the ground you will be operating on. Clearly indicate potentially dangerous spots that are full of mud or sticky soil, so your crew can avoid them.
• We recommend using wide tracked compact track loaders and excavators to reduce ground disturbance on your jobsite. Wider tracks enhance flotation and traction, making them perfect for working in softer soils and muddy areas.
• Regularly remove mud or debris from your equipment’s tracks, tires, and undercarriages between projects and at the end of each workday to help improve traction in wet conditions.

---

HOW TO REMOVE MACHINES FROM THE MUD

Despite being careful, your equipment will most likely get stuck in the mud at some point. When that happens, here are some strategies for how to handle the situation:

• Ensure you have strong straps, ropes, chains, or cables available in your toolkit to pull your equipment out of the mud when it gets stuck.
• To make it easier to get a stuck machine out of mud, try to lighten it by removing anything that can be removed. This way, you should be able to drag it out more easily.
• Improve the traction of your machine by placing planks behind its wheels when you are ready to pull it out.
• To prevent damage to your machine, attach the straps to a tow hook or the frame itself. This method gives you the best chance of pulling your equipment out without breaking anything.
• Chains can snap during towing, and the tow hooks then turn into deadly projectiles that fly through the air. To ensure they fall towards the ground instead of flying up, insert them with their tips up.
• It’s also important to keep a safe distance away from towing chains or straps in case one breaks and launches through the air.

Removing equipment that is stuck in wet, muddy conditions is a difficult, dangerous, and time consuming task. When a rainy day comes, take a look at these best practices to avoid getting stuck in the first place. If you do get stuck, though, use our tips for effectively pulling out your machine.

---

If you have any questions about dealing with equipment in muddy conditions, contact our team today!

CHOOSING THE RIGHT PATH: RENT, LEASE, OR BUY CONSTRUCTION EQUIPMENT WITH MCCANN INDUSTRIES

When it comes to acquiring construction equipment, contractors and business owners face a pivotal decision: should they rent, lease, or buy? Each option has its advantages, and understanding these can help you make the best choice for your business needs. At McCann Industries, we offer flexible solutions tailored to meet the diverse needs of our clients. Let’s explore the benefits of each option to help you decide which is best for your next project.

---

RENTING CONSTRUCTION EQUIPMENT: FLEXIBILITY AND CONVENIENCE

WHY RENT?

1. Cost Efficiency — Renting equipment means you only pay for what you need, when you need it. This can significantly lower your upfront costs, making it easier to manage your budget.
2. No Maintenance Worries — Maintenance and repairs can be costly and time-consuming. When you rent from McCann Industries, we handle all the maintenance, ensuring the equipment is always in top working condition.
3. Access to Latest Technology — Renting allows you to use the newest equipment without the long-term commitment. This can be particularly beneficial for specialized projects requiring advanced machinery.
4. Project Based Flexibility — Renting is ideal for short-term projects or for testing out equipment before making a bigger investment. You can easily switch out machines as project requirements change.

---

LEASING CONSTRUCTION EQUIPMENT: BALANCE AND PREDICTABILITY

WHY LEASE?

1. Lower Initial Costs — Leasing typically requires lower upfront costs compared to buying, which helps conserve your capital.
2. Predictable Expenses — With a lease, you have fixed monthly payments, making it easier to forecast your expenses and manage your cash flow.
3. Option to Buy — Many lease agreements offer the option to purchase the equipment at the end of the lease term. This can be a great way to eventually own equipment without the high initial investment.
4. Tax Benefits — Lease payments may be tax-deductible as a business expense, providing potential financial benefits.

---

BUYING CONSTRUCTION EQUIPMENT: LONG-TERM INVESTMENT

WHY BUY?

1. Ownership — Owning your equipment means you have complete control over its use and maintenance. This can be a significant advantage for long-term projects and frequent use.
2. Equity — Purchasing equipment is a long-term investment that builds equity. Over time, the equipment can serve as a valuable asset for your business.
3. Customization — Ownership allows for full customization of equipment to meet specific project needs.
4. Tax Incentives — There are various tax incentives available for equipment purchases, including depreciation benefits.

---

MCCANN INDUSTRIES: YOUR PARTNER IN EQUIPMENT SOLUTIONS

At McCann Industries, we understand that every business has unique needs. That’s why we offer a comprehensive range of rental, leasing, and purchasing options to ensure you get the right equipment for the job. Our team of experts is here to help you weigh the pros and cons and choose the best solution for your specific situation.

---

WHY CHOOSE MCCANN INDUSTRIES?

The team here at McCann believes you deserve a trusted supplier who cares about your long-term success as much as the success of the project at hand. We will be courteous and knowledgeable in our interactions with you and your team. We will seek the best equipment, construction supplies, and service and parts solutions that fit your needs, and our products and services will be industry-leading and dependable. When something goes wrong, we will jump on it with the urgency you expect. We will communicate with you along the way.

• Expert Support — Our knowledgeable staff can guide you through the decision-making process, ensuring you choose the best option for your project and budget.
• Wide Range of Equipment — We offer a diverse selection of high-quality construction equipment to meet all your needs.
• Flexible Terms — Whether you decide to rent, lease, or buy, we provide flexible terms to accommodate your financial situation and project requirements.
• Commitment to Quality — We are committed to providing well-maintained, reliable equipment to help you complete your projects efficiently and safely.

---

CALL US TO DISCUSS YOUR NEEDS

Deciding whether to rent, lease, or buy construction equipment is a crucial decision that can impact your business’s efficiency and financial health. At McCann Industries, we’re here to support you with expert advice and flexible solutions tailored to your needs. Contact us today to explore our equipment options and find the perfect fit for your next project.

HOW TO USE THE RIGHT EXCAVATOR ATTACHMENTS

Your excavators are essential machines on a wide variety of projects. Equipping them with the right attachments is crucial for tackling a diverse range of different tasks efficiently and effectively. From excavation to demolition to material handling, the choice of excavator attachments plays a pivotal role in your project’s success.

To help you out, we’ve put together some key tips and best practices for choosing the best excavator attachments for your specific needs.

---

FAMILIARIZE YOURSELF WITH COMMON EXCAVATOR ATTACHMENTS

A wide variety of attachments are available to handle various jobs, including digging, demolition, vegetation management, and material handling. Among the most commonly used attachments are:

• Excavator buckets: These versatile attachments facilitate digging, material carrying, grading, leveling, and backfilling tasks. Excavator buckets come in various types, such as digging, rock, grading, and trenching buckets.
• Multiprocessors: Designed with powerful jaws, multiprocessors excel in cutting and breaking down tough materials found in demolition work.
• Excavator grapples: These attachments enable you to grab and position a range of materials, from scrap and wood to piping and brush, increasing your excavator’s material handling capabilities.
• Hydraulic breakers: Also known as hammers, hydraulic breakers effectively pulverize solid materials like concrete, rock, and steel, making them indispensable for demolition projects.
• Excavator shears: Ideal for cutting and shredding structural steel, rebar, scrap metals, and construction materials, excavator shears are essential tools on demolition jobs.
• Excavator thumbs: Thumb attachments provide precise control for handling and moving debris, rocks, and loose materials, improving digging efficiency.

In addition to these excavator attachments, you can also use plate compactors, pulverizers, and trenchers to handle even more projects.

---

CONSIDER YOUR SPECIFICATIONS

When selecting excavator attachments, it’s crucial to think about your equipment’s hydraulic capabilities. Whether you’re operating hydraulic breakers, grapples, multiprocessors, or other attachments, ensure they align with your hydraulic circuit. Excavator hydraulic circuits are typically categorized as “high flow” or “standard flow,” with variations in flow rates among manufacturers. Confirm that the excavator attachments you choose match your machine’s hydraulic specifications for optimal performance.

---

ENSURE COMPATIBILITY WITH YOUR EQUIPMENT

After assessing the attachment’s hydraulic requirements, verify compatibility with your excavator’s mounting system. While many attachments feature a universal mount, differences may exist based on your specific make and model.

---

CONDUCT A TRIAL RUN

Before finalizing your purchase, schedule a demo of the excavator attachment. Allowing your operators to test it firsthand provides valuable insights into how easy it is to install, plus its maneuverability and overall performance. A test run helps ensure that the excavator attachment meets your expectations and requirements before making a commitment.

---

TALK WITH THE TEAM

There are many excavator attachments out there, so we recommend speaking with our equipment experts before making a purchase. We’ll need to understand what your typical projects include and which excavator you are using. Then, we will help you determine which size and type of attachments will work best.

Meet with our team to find the best excavator attachments for you.